Modelling the global ocean tides: modern insights from FES2004

During the 1990s, a large number of new tidal atlases were developed, primarily to provide accurate tidal corrections for satellite altimetry applications. During this decade, the French tidal group (FTG), led by C. Le Provost, produced a series of finite element solutions (FES) tidal atlases, among which FES2004 is the latest release, computed from the tidal hydrodynamic equations and data assimilation. The aim of this paper is to review the state of the art of tidal modelling and the progress achieved during this past decade. The first sections summarise the general FTG approach to modelling the global tides. In the following sections, we introduce the FES2004 tidal atlas and validate the model against in situ and satellite data. We demonstrate the higher accuracy of the FES2004 release compared to earlier FES tidal atlases, and we recommend its use in tidal applications. The final section focuses on the new dissipation term added to the equations, which aims to account for the conversion of barotropic energy into internal tidal energy. There is a huge improvement in the hydrodynamic tidal solution and energy budget obtained when this term is taken into account.     

Fluid-dynamics driving saline water in the North East German Basin

In several areas of the North German Basin, saline water comes close to, or even reaches the surface. Available data from wells indicate that brine stratification is under unstable conditions in the deeper underground. In order to analyse the possible transport mechanisms, 3D thermohaline simulations have been carried out for two different scenarios. The 3D regional model (230×330 km) indicates that salty water is driven to the surface by hydrostatical forces from the surrounding highlands. In addition, a smaller scale model (10×10 km) has been constructed with a grid resolution accounting for possible convective flow. The results indicate that convective flow may play a dominant role in areas with minor topography. In summary, the complex pattern of near surface occurrences of saline water probably results from the interaction of hydrostatic and thermal forces.     

How to anchor hotspots in a convecting mantle?

Laboratory experiments were performed to study the influence of density and viscosity layering on the formation and stability of plumes. Viscosity ratios ranged from 0.1 to 6400 for buoyancy ratios between 0.3 and 20, and Rayleigh numbers between 10⁵ and 2.10⁸. The presence of a chemically stratified boundary layer generates long-lived thermochemical plumes. These plumes first develop from the interface as classical thermal boundary layer instabilities. As they rise, they entrain by viscous coupling a thin film of the other layer and locally deform the interface into cusps. The interfacial topography and the entrainment act to further anchor the plumes, which persist until the chemical stratification disappears through entrainment, even for Rayleigh numbers around 10⁸. The pattern of thermochemical plumes remains the same during an experiment, drifting only slowly through the tank. Scaled to an Earth’s mantle without plate tectonics, our results show that: (1) thermochemical plumes are expected to exist in the mantle, (2) they could easily survive hundreds of millions of years, depending on the size and magnitude of the chemical heterogeneity on which they are anchored, and (3) their drift velocity would be at most 1-2 mm/yr. They would therefore produce long-lived and relatively fixed hotspots on the lithosphere. However, the thermochemical plumes would follow any large scale motion imposed on the chemical layer. Therefore, the chemical heterogeneity acts more as a ‘floating anchor’ than as an absolute one.     

Electrochemical properties of solids at the aqueous–solid interface and heterogeneity of surfacePropriétés électrochimiques des solides à l'interface solide–eau et hétérogénéité de surface

In aqueous medium, solid surfaces are in general electrically charged. The induced electrical and chemical properties govern numerous phenomena, such as colloidal stability or transport of pollutants. Numerous industrial processes make use of these properties. The understanding of the underlying mechanisms at molecular level is of high importance in order to predict and master the behaviour of dispersed matter in the environment and in industrial processes. The present paper shows the evolution of theories and experimental methods, their recent developments and applications. To cite this article: F. Thomas et al., C. R. Geoscience 334 (2002) 633–648.     

Salinization problems in the NEGB: results from thermohaline simulations

The occurrence of salty waters close to the surface is a well-known problem in the North East German Basin. Previous numerical simulations showed that near-surface brine occurrences are due to the interaction of hydrostatic and thermally induced forces (mixed convection). The influence of hydraulic permeabilities and thermal conductivities on the observed patterns remained an open question. Based on a hydro-geochemical dataset, thermohaline simulations are carried out in order to quantify the impact of these physical parameters on brine migration. The results indicate that the salinity and temperature profiles are strongly controlled by hydraulic permeabilities and can locally be influenced by thermal conductivities.     

Insights into the Microwave Instruments Onboard the Fengyun 3DSatellite: Data Quality and Assimilation in theMet Office NWP System

正1Met Office, Exeter EX1 3PB, UK2National Satellite Meteorological Center, China Meteorological Administration, Beijing 100081, China     

Defining the shelf edge and the three‐dimensional shelf edge to slope facies variability in shelf‐edge deltas

Shelf‐edge deltas play a critical role in shelf‐margin accretion and deepwater sediment delivery, yet much remains to be understood about the detailed linkage between shelf edge and slope sedimentation. The shelf edge separates the flat‐lying shelf from steeper slope regions, and is observable in seismic data and continuous outcrops; however, it is commonly obscured in non‐continuous outcrops. Defining this zone is essential because it segregates areas dominated by shelf currents from those governed by gravity‐driven processes. Understanding this linkage is paramount for predicting and characterizing associated deepwater reservoirs. In the Tanqua Karoo Basin, the Permian Kookfontein Formation shelf‐slope clinothems are well‐exposed for 21 km along depositional strike and dip. Two independent methods identified the shelf‐edge position, indicating that it is defined by: (i) a transition from predominantly shelf‐current to gravitational deposits; (ii) an increase in soft‐sediment deformation; (iii) a significant gradient increase; and (iv) clinothem thickening. A quantitative approach was used to assess the impact of process‐regime variability along the shelf edge on downslope sedimentation. Facies proportions were quantified from sedimentary logs and photographic panels, and integrated with mapped key surfaces to construct a stratigraphic grid. Spatial variability in facies proportions highlights two types of shelf‐edge depositional zones within the same shelf‐edge delta. Where deposition occurred in fluvial‐dominated zones, the slope is sand rich, channelized with channels widening downslope, and rich in collapse features. Where deltaic deposits indicate considerable tidal reworking, the deposits are thin and pinch‐out close to the shelf edge, and the slope is sand poor and lacks channelization. Amplification of tidal energy, and decrease in fluvial drive on the shelf, coincides with a decrease in mouth bar and shelf‐edge collapse, and a lack of channelization on the slope. This analysis suggests that process‐regime variability along the shelf edge exercised significant control on shelf‐edge progradation, slope channelization and deepwater sediment delivery.     

The East Caledonian Current: A Case Example for the Intercomparison between AltiKa and In Situ Measurements in a Boundary Current

This paper presents an assessment of SARAL/AltiKa satellite altimeter for the monitoring of a tropical western boundary current in the south-western Pacific Ocean: the East Caledonian Current. We compare surface geostrophic current estimates obtained from two versions of AltiKa along-track sea level height (AVISO 1 Hz and PEACHI 40 Hz) with two kinds of dedicated in situ datasets harvested along the satellite ground tracks: one deep-ocean current-meter mooring deployed in the core of the boundary current and five glider transects. It is concluded that the AltiKa-derived current successfully captures the velocity of the boundary current, with a standard error of 11 cm/s with respect to the in situ data. It also appears important to reference AltiKa sea level anomaly to the latest mean dynamic topography available in our area. Doing so, Ka-band altimetry provides a satisfactory representation of the western boundary current. Thereby, it usefully contributes to observing its variability in such a remote and under-observed ocean region. However, the rather long repeat period of SARAL (35 days) in comparison to the high frequency variability seen in the flow velocity of the boundary current calls for a combined use of SARAL with the other satellite altimetry missions.     

Simulating Magnetized Jets

A suitable model for the macroscopic behavior of accretion disk-jet systems is provided by the equations of MagnetoHydroDynamics (MHD). These equations allow us to perform scale-encompassing numerical simulations of multidimensional nonlinear magnetized plasma flows. For that purpose, we continue the development and exploitation of the Versatile Advection Code (VAC) along with its recent extension which employs dynamically controlled grid adaptation. In the adaptive mesh refinement AMRVAC code, modules for simulating any-dimensional special relativistic hydro- and magnetohydrodynamic problems are currently operational. Here, we review recent 3D MHD simulations of fundamental plasma instabilities, relevant when dealing with cospatial shear flow and twisted magnetic fields. Such magnetized jet flows can be susceptible to a wide variety of hydro (e.g. Kelvin-Helmholtz) or magnetohydrodynamic (e.g. current driven kink) instabilities. Recent MHD computations of 3D jet flows have revealed how such mutually interacting instabilities can in fact aid in maintaining jet coherency. Another breakthrough from computational magnetofluid modeling is the demonstration of continuous, collimated, transmagnetosonic jet launching from magnetized accretion disks. Summarizing, MHD simulations are rapidly gaining realism and significantly advance our understanding of nonlinear astrophysical magnetofluid dynamics.     

Anhydrite–gypsum transition in the argillites of flooded salt workings in eastern France

This study aims at understanding the physico-chemical interactions between the saturated brine and the rocks enclosing the underground salt workings in Lorraine (eastern France). These anhydrite-rich and argillaceous rocks were characterized in terms of mineralogy, micro-texture and connected porosity. Then, the two main lithofacies, massive anhydrite and anhydrite-rich argillite, were immersed in brine during more than 1 year. During this batch experiment, the argillites were affected by macroscopic splitting, contrarily to the massive anhydrite. Micro-texture and brine chemical analyses clearly show the swelling due to the hydration of anhydrite into gypsum inside the argillites, whereas hydration occurs superficially on the massive anhydrite, due to its very low permeability. Anhydrite–gypsum transformation is promoted by the presence of dissolved strontium and potassium in saturated brine. The low activity of water in saturated brine does not allow the clay fraction to swell significantly during the experiment. Thus, the expansion resulting from the hydration of anhydrite into gypsum might be responsible of the splitting of argillite in a saturated brine environment. The superficial anhydrite hydration on massive anhydrite can be explained by the low amount of connected porosity (less than 1%).